FSP2000-A0AGPBI

Dimensions : 200 x 150 x 86mm
Application : For standard, advanced workstation, server and industrial power system.
Watt : 2000W

Description

FSP2000-A0AGPBI is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 2000 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial, especially high wattages environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.

Application

For standard, advanced workstation, server and industrial power system.


Features

  • 80 PLUS Platinum
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • 16 x PCI-E 6+2 PIN
  • INTERNAL 12 cm fan 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested Line input fuse protection

Model Name FSP2000-A0AGPBI
Wattage 2000W
Dimension 200mm (L) × 150 mm (W) × 86mm (H)
Product Highlight Efficiency Level 80 Plus Platinum
Altitude 5000M
General Specification Effciency 92% @ 115V / 93% @ 230V
Voltage Regulation +3.3V, +12V, +5V, +5SB: ±5%
-12V: ±10%
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ 15.0 Amps-rms maximum
230V@ 12.0 Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 17mSec. Minimum@100% Load,
230V/50Hz 17mSec. Minimum@100% Load
Ouput Voltage Regulation +3.3Vdc output : +3.76 Vdc minimum, + 4.8Vdc maximum
+5Vdc output : +5.75 Vdc minimum, + 7.0Vdc maximum
+12Vdc output : +13.5 Vdc minimum, + 15.5Vdc maximum
Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum
Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
Environmental Requirement Temperature Range Operating : 0 to +50℃
Storage :-20 to +80℃
Humidity Operating : 10-90% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage
Safety CE,FCC,TUV,UL/cUL

Output Voltage and Current Rating

+3.3V +5V +12V1 +12V2 +12V3 +12V4 +12V5 +12V6 -12V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 120mV 120mV 120mV 120mV 120mV 50mV
Regulation Load % ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 25A 25A 30A 30A 30A 30A 30A 30A 0.5A 4A
Output Min.(A) 0A 0.1A 0.2A 0.2A 0.2A 0.2A 0.2A 0.2A 0A 0A

Notes

  • Maximum continuous total DC output power should not exceed 2000W.
  • Maximum continuous combined load on +3.3DC and +5VDC outputs shall not exceed 150W.
  • Ripple and noise measurements shall be made under all specified load conditions through a single pole low pass filter with 20MHz cutoff frequency. Outputs shall bypassed at the connector with a 0.1uF ceramic disk capacitor and a 10uF electrolytic capacitor to simulate system loading.

Contact us

 
Web Analytics