FSP250-701UJ

Dimensions : 190.0 x 100.0 x 40.5mm
Application : For standard, advanced server, NAS and industrial power system.
Watt : 250W

Description

FSP250-701UJ is an industrial level of switching power supply. The power supply comes to offer the total power capacity up to 250 Watts, and uses unique active PFC (Power Factor Correction) circuit design with its high-load electrical components, makes it to be perfectly used in an industrial environment. In addition, with its full range of input and output electrical features, the power supply is ideally the best choice for server, workstation, communication or any other automation applications to use. The product also complies with the latest safety and EMC standards, which is perfectly to meet various regulations worldwide.

Application

For standard, advanced server, NAS and industrial power system.


Features

  • 80 Plus Bronze
  • Low Ripple & Noise
  • Output over voltage protection
  • Short circuit protection on all outputs
  • Resettable power shut down
  • INTERNAL 4 cm fan
  • Dual +12V output (+12V/1,+12V/2)
  • -5V is included
  • 100% burn-in under high ambient temperature(50℃)
  • Vacuum-impregnated transformer
  • MTBF:100K hours at 25℃
  • 100% Hi-pot tested
  • Line input fuse protection

Model Name FSP250-701UJ
Wattage 250W
Dimension 190.0mm (L) × 100.0 mm (W) × 40.5mm (H)
Product Highlight Efficiency Level 80 Plus Bronze
Altitude 2000M
General Specification Effciency 85% 230VAC
Voltage Regulation +3.3V,
+12V,
+5V,
+5SB: ±5%
-12V,
-5V: ±10%
Inrush current 50A @ 115V, or 100A @ 230V
PWOK Delay Time 500ms > PWOK > 100ms
EMC performance EN61000-3-2
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ 4.0 Amps-rms maximum,
230V@ 2.0Amps-rms maximum
Output Specification Hold-up time 115V/60Hz 17mSec. Minimum@100% Load,
230V/50Hz 17mSec. Minimum@100% Load
Ouput Voltage Regulation +3.3Vdc output : +3.5 Vdc minimum, + 4.8Vdc maximum
+5Vdc output : +5.5 Vdc minimum, + 7Vdc maximum
+12Vdc output : +13.4 Vdc minimum, + 16Vdc maximum
Ripple & Noise 115V-rms/230V-rms 5V 20ms Maximum
115V-rms/230V-rms 12V 20ms Maximum
Over current protection 3.3V:50mV p-p
5V:50mV p-p
12V1:120mV p-p
12V2:120mV p-p
-12V:120mV p-p
5Vsb:50mV p-p
-5V:100mV p-p
Short Circuit Protection load < 0.1 Ohm
Environmental Requirement Temperature Range Operating : 0 to +50℃
Storage :-20 to +80℃
Humidity Operating : 85% to % RH, Non-condensing
Storage : 95% to % RH, Non-condensing
MBTF The power supply have a minimum predicted MTBF(MIL-HDBK-217) of 100,000 hours of continuous operation at 25℃, maximum-output load, and nominal AC inout voltage
Safety CE,FCC,TUV,UL/cUL,CCC

Output Voltage and Current Rating

+3.3V +5V +12V1 +12V2 -12V -5V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 120mV 120mV 120mV 100mV 50mV
Regulation Load % ±5% ±5% ±5% ±5% ±10% ±10% ±5%
Output Max.(A) 14A 16A 16A 16A 0.5A 0.3A 3A
Output Min.(A) 0.3A 0.3A 0.5A 0.5A 0A 0A 0A

Notes

  • 5V, 3.3V, 12V, -12V Will have the regulation to 10% when all load take off.
  • The +3.3V and +5V total output shall not exceed 110 watts.
  • The total output shall not exceed 250 watts.

Contact us

 
Web Analytics