FSP300-60GHN(85)

Dimensions : 140 x 150 x 86mm
Application : Desktop
Watt : 300W

Description

This specification describes a 300 watts power supply. With +5V stand-by, second 12V rail and remote ON/OFF control for ATX-12V system and a “Power factor collector (PFC)” circuit to meet EPA requirement of input range with in 115V/60HZ & 230V/50Hz.

Application

Desktop


Model Name FSP300-60GHN(85)
Wattage 300W
Dimension 140mm (L) × 150 mm (W) × 86mm (H)
Product Highlight Efficiency Level 80Plus Bronze
Erp Lot <0.5W
Input Voltage 100~240Vac
General Specification Effciency 82%@ 20% load; 85%@ 50% load; 82%@ 100% load
PWOK Delay Time 500ms > PWOK > 100ms
EMC performance EN55022 class B,
Input Electrical Specification Input Frequency 47 ~ 63 Hz
Input Current 115V@ < 3.5 Amps - rms
230V@ < 2.0 Amps - rms
Output Specification Output Rise Time + 3.3Vdc : 20ms Maximum
+ 5Vdc : 20ms Maximum
+ 12Vdc : 20ms Maximum
+ 5Vsb : 20ms Maximum
- 12Vdc : 20ms Maximum
Environmental Requirement Temperature Range Operating : 10 to +50℃
Storage :-20 to +80℃
Humidity Operating : 5-95% to % RH, Non-condensing
Storage : 5-95% to % RH, Non-condensing
MTBF The power supply reliability,when calculated by MIL-HDBK-217;latest revision, are exceed 100,000 hours with all output at maximum load and an ambient temperature of 25℃.
Safety CE,FCC,TUV,UL/cUL

Output Voltage and Current Rating

+3.3V +5V +12V1 +12V2 -12V +5Vsb
Ripple-Noise(R-P) mV 50mV 50mV 50mV 120mV 200mV 50mV
Regulation Load % ±5% ±5% ±5% ±5% ±10% ±5%
Output Max.(A) 21A 20A 14A 14A 0.5A 2.5A
Output Min.(A) 0.1A 0.2A 0.1A 0.5A 0A 0A

Notes

( 1 ) +3.3V & +5V total output not exceed 105W.
 
( 2 ) Maximum combined current for the +12V outputs shall be 24A.
 
( 3 ) +12V2 Peak current is 18A (less then 10m Sec.) , minimum voltage during peak is >11.0Vdc.
 
( 4 ) +5Vsb Peak current is 3.5A(less then 500m Sec.) , minimum voltage during peak is > 4.5Vdc. 
 
 

 

Contact us

 
Web Analytics